Control™ Test Strips

Easy Sampling with Control™ Test Strips

The Control™ Test Strip automatically draws blood into the test strip, and shows you if there is enough blood for an accurate reading.
  

Intended Use:

CONTROL™ Test Strips must be used with the CONTROL™ Blood Glucose Meters for the quantitative measurement of blood glucose level in whole blood. CONTROL™ Test Strips are for testing outside the body (in vitro diagnostic use only).

Storage and Handling:

• Store the CONTROL™ test strip vials in a cool, dry place between 39-86o F (4-30o C). Keep out of direct sunlight. Do not refrigerate or freeze.
• Store test strips in its original vials only. Do not mix the test strips in new vials or in any other container.
• Immediately replace the vial cap and close tightly after removing an CONTROL™ Test Strip.
• Use test strip immediately after removing it from the vial.
• Make a notation of the discard date on the vial label when you first open it. Discard remaining CONTROL™ Test Strips 3 months after first opening the vial.
• Avoid getting dirt, food, and water on the test strip. Do not handle test strips with wet hands.
• Do not use test strips after the expiration date printed on the package or vial since it may cause inaccurate results.
• Do not bend, cut, or alter an CONTROL™ Test Strip.
• CONTROL™ Test Strips are for single use only. Do NOT re-use.

Keep test strip vial away from children. A child could choke on the cap or be harmed if the drying agent in cap is swallowed, inhaled, or contacts skin.

Refer to your Control™ Owner's Booklet for detailed instructions on testing your blood.